AUTOFILL WATER BOILERS

Wall Mounted Range

Make the most of your space with a top quality, wall mounted boiler.

Our high performance wall mounted boilers are the perfect solution to your hot drinks requirements. Designed to last, these advanced boilers are available in 3 sizes delivering 3, 7 or 15 litres at any one time and from 28 to 57 litres per hour.

We offer the Instanta wall range with a choice of either impact resistant moulded plastic or heavy duty 16swg stainless steel cases.

All Instanta wall models come with these great user benefits:

• Stainless steel boilers.
• Stylish compact reliable and long lasting.
• Energy saving ECO mode (not on WM3).
• Electronically controlled for constant temperatures of 98ºC.
• Large non-drip taps.
• Easy installation and maintenance.
• Insulated for economy and safety.
• Minimal steam escape.
• Low voltage switching on all controls.
• Early warning intelligent diagnostics with LCD read out.
• Five water level sensors (Not WM3).
• Safety cut out on overflow and element.
• Cases can be removed without the need to drain the boilers.
• 2 year on site parts and labour guarantee
• Guarantee stated here applies to UK installations only.

Unique, new message display incorporating boiler status and diagnostic display!

Wall models

Instanta WM3

• Plastic or stainless steel case.
• Heat up time from cold 12 minutes.
• Rapid draw off after initial heat up 3 litres (approx. 18 cups or 12 mugs).
• Minimum hourly output 28 litres (approx. 168 cups or 112 mugs).
• Recovery per minute 0.5 litres.
• Power loading (single phase) 3Kw.
• Average standby power consumption 0.1kW/hr.
• Dimensions W 332mm x D 298mm x H 452mm.
• 2 year on site parts and labour guarantee

Boilers can easily be switched to operate on energy saving half capacity!

Instanta WM7

• Plastic or stainless steel case.
• Heat up time from cold 25 minutes.
• Rapid draw off after initial heat up 7 litres (approx 42 cups or 28 mugs).
• Minimum hourly output 28 litres (approx. 168 cups or 112 mugs).
• Recovery per minute 0.5 litres.
• Power loading (single phase) 3Kw.
• Average standby power consumption 0.12kW/hr.
• Dimensions W 350mm x D 310mm x H 498mm.
• 2 year on site parts and labour guarantee

Instanta WM15-3

• Plastic or stainless steel case.
• Heat up time from cold 57 minutes.
• Rapid draw off after initial heat up 15 litres (approx. 90 cups or 60 mugs).
• Minimum hourly output 28 litres (approx. 168 cups or 112 mugs).
• Recovery per minute 0.5 litres.
• Power loading (single phase) 3Kw.
• Average standby power consumption 0.13kW/hr.
• Dimensions W 350mm x D 330mm x H 545mm.
• 2 year on site parts and labour guarantee

Instanta WM15-6

• Plastic or stainless steel case.
• Heat up time from cold 28 minutes.
• Rapid draw off after initial heat up 15 litres (approx. 90 cups or 60 mugs).
• Minimum hourly output 57 litres (approx. 342 cups or 228 mugs).
• Recovery per minute 1.0 litres.
• Power loading (single phase) 6Kw.
• Average standby power consumption 0.13kW/hr.
• Dimensions W 350mm x D 330mm x H 545mm.
• 2 year on site parts and labour guarantee

If you are working to a budget and want Instanta quality and reliability but with slightly lower specifications and less style we are pleased to offer the superb value range.

Where space is at a premium and you need the keenest price, our WA5 wall mounted boiler is ideal. Using the same electronics as the 1500 and 3000 table top boilers the WA5 provides a plentiful supply of hot water within a stainless steel case.

All Value range models come with these great user benefits:

• Compact and reliable.
• Self priming Long life incoloy elements.
• Large non-drip taps.
• Insulated for economy and safety.
• Minimal steam escape.
• Low voltage switching on all controls.
• Basic fault self diagnosis.
• Easy access for service and cleaning.
• Boil dry protection.
• 1 year on site parts and labour guarantee
• Guarantee stated here applies to UK installations only.

Instanta WA5

• Heat up time from cold 18 minutes.
• Rapid draw off after initial heat up 5 litres (approx. 60 cups or 20 mugs).
• Minimum hourly output 27 litres (approx. 162 cups or 108 mugs).
• Recovery per minute 0.5 litres.
• Power loading (single phase) 3Kw.
• Average standby power consumption 0.1kW/hr.
• Dimensions W 285mm x D 285mm x H 430mm.
• 1 year on site parts and labour guarantee

Heatrae Sadia Supreme Water Boilers

Heatrae Sadia’s Supreme is available in a high quality white thermoplastic finish with capacities of 2.5 litre, 5 and 7.5 litre. This compact and elegant model offers a full range of benefits including:

All Supreme Water Boilers come with these great user benefits:

• Intelliboil™ technology for the efficient management of the boiling cycle.
• Easy installation with auto-commissioning.
• Integral electronic water conditioner makes Supreme less prone to scale.
• Ready indicator confirms when ready for use.
• Engineering grade thermoplastic water container for longer life expectancy.
• Detachable steam condensing chamber for easy service access.
• Modular construction ensures easy maintenance.
• Superloy element for long life.
• Boil dry protection.
• Retains same footprint, service connections and wall fixings as previous models.
• Easy to clean white high impact thermoplastic outer casing BEAB approved.
• Up to 45 cups immediate draw off depending on model.
• 2 year on site parts and labour guarantee
• Guarantee stated here applies to UK installations only.

Heatrae Sadia Supreme 140

• Rapid draw off after initial heat up 2.5 litres (approx. 15 cups or 10 mugs).
• Minimum hourly output 23 litres (approx. 138 cups or 92 mugs).
• Power loading (single phase) 2.5Kw.
• Dimensions W 290mm x D 190mm x H 445mm.
• 2 year on site parts and labour guarantee

Heatrae Sadia Supreme 155

• Rapid draw off after initial heat up 5 litres (approx. 30 cups or 20 mugs).
• Minimum hourly output 25 litres (approx. 155 cups or 100 mugs).
• Power loading (single phase) 2.5Kw.
• Dimensions W 335mm x D 205mm x H 510mm.
• 2 year on site parts and labour guarantee

Heatrae Sadia Supreme 170

• Rapid draw off after initial heat up 7.5 litres (approx. 45 cups or 30 mugs).
• Minimum hourly output 28 litres (approx. 170 cups or 112 mugs).
• Power loading (single phase) 2.5Kw.
• Dimensions W 335mm x D 260mm x H 510mm.
• 2 year on site parts and labour guarantee

Supreme Stainless Steel Finish Water Boilers

The exciting new Heatrae Sadia Supreme is available in an ultra modern fingerprint resistant stainless steel finish. Available in three capacities of 2.5 litre, 5 and 7.5 litre. This compact and elegant model offers a full range of benefits including:

All Supreme SS Water Boilers come with these great user benefits

• Intelliboil™ technology for the efficient management of the boiling cycle.
• Easy installation with auto-commissioning.
• Integral electronic water conditioner makes Supreme SS less prone to scale.
• Ready indicator confirms when ready for use.
• Engineering grade thermoplastic water container for longer life expectancy.
• Detachable steam condensing chamber for easy service access.
• Modular construction ensures easy maintenance.
• Satin chrome finished heavy duty die-cast push/pull lever.
• Superloy element for long life.
• Boil dry protection.
• Retains same footprint, service connections and wall fixings as previous models.
• Fingerprint resistant stainless steel outer casing.
• BEAB approved.
• Up to 45 cups immediate draw off depending on model.
• 2 year on site parts and labour guarantee.
• Guarantee stated here applies to UK installations only.

Heatrae Sadia Supreme 150 SS

• Rapid draw off after initial heat up 2.5 litres (approx. 15 cups or 10 mugs).
• Minimum hourly output 25 litres (approx. 150 cups or 100 mugs).
• Power loading (single phase) 2.5Kw.
• Dimensions W 337mm x D 203mm x H 423mm.
• 2 year on site parts and labour guarantee

Heatrae Sadia Supreme 165 SS

• Rapid draw off after initial heat up 5 litres (approx. 30 cups or 20 mugs).
• Minimum hourly output 27.5 litres (approx. 165 cups or 110 mugs).
• Power loading (single phase) 2.5Kw.
• Dimensions W 337mm x D 203mm x H 501mm.
• 2 year on site parts and labour guarantee

Heatrae Sadia Supreme 180 SS

• Rapid draw off after initial heat up 7.5 litres (approx. 45 cups or 30 mugs).
• Minimum hourly output 30 litres (approx. 180 cups or 120 mugs).
• Power loading (single phase) 2.5Kw.
• Dimensions W 337mm x D 262mm x H 506mm.
• 2 year on site parts and labour guarantee

Supreme Large Capacity Water Boilers

Heatrae Sadia has extended its range of boiling water products through the introduction of four large capacity models. Available in stylish fingerprint resistant stainless steel they can provide up to 560 cups per hour.

Benefits of the new range include:

• Intelliboil™ technology for the efficient management of the boiling cycle.
• Easy installation with auto-commissioning.
• Integral electronic water conditioner makes Supreme SS less prone to scale.
• Ready indicator confirms when ready for use.
• Supplied with one tap - up to three can be fitted for high demand applications.
• Lockable satin chrome heavy duty die-cast tap handle for security applications.
• Hinged mounting bracket for easy service access.
• Superloy element for long life.
• Fingerprint resistant stainless steel outer casing.
• Boil dry protection.
• BEAB approved.
• Up to 240 cups immediate draw off depending on model.
• 2 year on site parts and labour guarantee
• Guarantee stated here applies to UK installations only.

Heatrae Sadia Supreme 220 SS

• Rapid draw off after initial heat up 10 litres (approx. 15 cups or 10 mugs).
• Minimum hourly output 36.5 litres (approx. 220 cups or 146 mugs).
• Power loading (single phase) 3Kw.
• Dimensions W 372mm x D 365mm x H 585mm.
• 2 year on site parts and labour guarantee

Heatrae Sadia Supreme 250 SS

• Rapid draw off after initial heat up 15 litres (approx. 90 cups or 60 mugs).
• Minimum hourly output 41.5 litres (approx. 250 cups or 166 mugs).
• Power loading (single phase) 3Kw.
• Dimensions W 372mm x D 365mm x H 655mm.
• 2 year on site parts and labour guarantee

Heatrae Sadia Supreme 310 SS

• Rapid draw off after initial heat up 25 litres (approx. 150 cups or 30 mugs).
• Minimum hourly output 52 litres (approx. 310 cups or 208 mugs).
• Power loading (single phase) 3Kw.
• Dimensions W 372mm x D 365mm x H 795mm.
• 2 year on site parts and labour guarantee

Heatrae Sadia Supreme 560 SS

• Rapid draw off after initial heat up 40 litres (approx. 240 cups or 160 mugs).
• Minimum hourly output 93 litres (approx. 560 cups or 373 mugs).
• Power loading (single phase) 6Kw .
• Dimensions W 372mm x D 365mm x H 1000mm.
• 2 year on site parts and labour guarantee